How-to Rinse a Siphon Feed Airbrush After a Spray Session PDF Print E-mail
Written by Adam Rice   
Friday, 02 November 2007
A 'Spray Session' Ends when you leave for an extended period of time, like lunch or the end of the day.
  1. Remove the Paint Bottle from the Color Stem
  2. Attach another Paint Bottle filled with the appropriate Cleaning Solution
  3. Spray the cleaner through the airbrush until it sprays clear.
    • Note: Spray the Cleaning Solution into some kind of filter to catch the spray and keep it out of the air and out of your lungs. The filter can be a towel, a paper towel, a filtering system, etc.
  4. Remove the Paint Bottle of Cleaning Solution
  5. Remove the Handle
  6. Loosen the Needle Chucking Nut
  7. Remove the Needle
  8. Wipe down the Needle
    • Note: Be careful the Needle is sharp
  9. Carefully replace the Needle
  10. Give the Needle a little twist counter-clockwise
  11. Tighten the Needle Chucking Nut
  12. Replace the Handle
  13. Spray until dry
  14. Hang the airbrush up to dry
 
< Prev   Next >
[ Back ]
Joomla Template by Joomlashack
components joomla modules Joomla Templates Joomla tutorials